一级毛片不卡免费视频,国产精品videosex性欧美,性欧美激情精品,欧洲一级视频,国产一级在线看,国产高清一级毛片,国产黄色片在线

Computer hardware failure

Time:2014-07-07
shared:
(1) The microcomputer can not be connected to the power supply: 1. Check whether the local power grid is powered off; 2. Check whether the power socket or UPS power switch is on;

(1) The microcomputer cannot be connected to the power supply

1. Check the local power grid for power failure

2. Check whether the power socket or UPS power switch is on

3. Check whether the microcomputer power is plugged into the power socket

If the above problems do not exist, please check whether the power fan at the back of the microcomputer rotates. If it does, check whether the power supply of the monitor is turned on. If the fan does not rotate, the power supply of the microcomputer may be damaged. At this time, you can replace the power supply of the microcomputer or contact the maintenance personnel of the company.

(2) The microcomputer can not start normally

First of all, observe the phenomenon and sound when the computer starts up. If there is a sound of "Di --", "Di --" or "Di Di", it is generally a fault of the memory module or display card. You can replace the memory module or display card When starting, observe that the indicator light of the hard disk is the oscillograph flashing. If it does not flash, it may be that there is a problem with the computer setting. If it flickers, it may be that the software or hard disk is faulty.

Reset the computer's CMOS

Open the computer shell, remove the interface board and restart the computer. If it can be started, it is the interface board fault. Replace the interface board or contact the company. If it still cannot be started, please contact our maintenance personnel.

(3) The monitor can not display normally

1. First, check whether the monitor power supply is connected properly or whether the monitor power switch is on

2. Check the color or status of the display power indicator

1) If the color is normal, please check whether the signal of the monitor is connected properly.

2) If the color is pale white, please check whether the hard disk is connected well, whether the memory module is inserted properly, and whether the interface board is plugged in properly, and plug in and out again

3) If the display screen is black, the battery on the motherboard can be discharged

3. Replace the monitor

(4) The floppy drive does not work properly

1. Please check if the floppy disk drive in CMOS is set correctly

2. If the floppy disk is damaged or not formatted, please replace it or reformat it

3. Please check whether the indicator light of the floppy disk drive is on. If not, check whether the power cord of the floppy drive is connected and whether the signal line of the floppy drive is connected properly

(5) Hard disk does not start normally

1. Please check if there is a floppy disk in the floppy drive. Please remove it

2. Please observe whether the hard disk indicator light is on. If not, please check whether the hard disk power cord and data cable are connected properly

3. Please check the boot in the CMOS settings

(6) Keyboard keys don't work

1. Please check whether the keyboard is connected to the keyboard port

2. If it is an industrial computer, please check whether the keyboard lock is pressed

3. Replace the keyboard


平南县| 临泉县| 昭觉县| 海兴县| 新余市| 华容县| 会理县| 景谷| 凌云县| 平阴县| 呼和浩特市| 白朗县| 甘南县| 枣强县| 萨嘎县| 山阳县| 涞源县| 布尔津县| 台北县| 环江| 凤冈县| 临沂市| 刚察县| 吴江市| 德令哈市| 大悟县| 甘德县| 陇西县| 屯留县| 依兰县| 昌宁县| 河东区| 南陵县| 临江市| 洛宁县| 涞水县| 忻城县| 扶沟县| 许昌市| 磐安县| 大埔区|